Introduction of Midwest Critter Nation Homes For Pet 162

Midwest Critter Nation Homes For Pet 162 is a top-of-the-line small animal cage that offers a spacious and comfortable living space for your pets. It is perfect for small animals such as rabbits, guinea pigs, chinchillas, and ferrets. This deluxe critter cage has an estimated price range of $200 to $250 and is now available in the market.

 

To assemble the Midwest Critter Nation 162, follow these steps:

Tools Needed

• A regular screwdriver (instead of the small one provided)
• A rubber mallet

Assembly Instructions

1. Base Assembly:

   • Begin with the base. Ensure the holes on the cross beams face inward and are on the bottom.
   • Leave one side open until you attach the bottom grid shelf, then secure the fourth side.

2. Casters:

   • Use a rubber mallet to firmly insert the casters. Ensure they go all the way down to avoid a leaning cage.

3. Vertical Panels and Doors:

   • Remove the red plastic inserts used to maintain the shape during shipping.
   • Fit the panels by aligning the pegs with the corresponding holes. If a peg is bent, straighten it with a hammer.

4. Side Panels:

   • Check the tabs on the top for any bends and straighten if necessary.
   • Use a rubber mallet to tap the panel into place, ensuring the pegs align with the holes.

5. Middle Floor Panel Grid:

   • Ensure the hanging hook is on the bottom side of this piece before installing.

6. Top Assembly:

   • The locking clips provided are optional as the top is quite heavy. Tighten the screws if you choose to use the clips.

7. Pans and Shelves:

   • If you are using Bass pans (optional stainless steel pans), install them before the shelves. Insert them at an angle and then level them into place.